Contact Us!+1 800.468.1516 +1 715.294.2121

This site is currently under construction and the contents of the website may be temporarily inaccurate.

datacell.jpg

DataCELL® J1939 | J1128

Ruggedized CANbus Data Network Cable.

Designed to the exacting SAE J1939 specification, Data® J1939 CANbus Data Network Cable delivers consistent, reliable performance for your sophisticated, ruggedized data network—at a competitive price.DataCELL® J1939 features a jacket that makes pulling and stripping faster and easier.

DataCELL® J1939 cables are specifically designed to withstand the extreme conditions today’s equipment is subjected to—such as oil, fluids, equipment vibration and EMI/RFI interference. NWI's proprietary DataCELL® technology means reliable cable performance with exceptional impedance consistency over the entire cable length—which increases the efficiency and safety of your equipment and provides dependability you can count on.

 
 SAE J1939/15SAE J1128SAE J1128
 Shielded Twisted PairUnshielded Twisted PairLow Voltage Primary Cable - TXL
FEATURES      
Signal
Control -
Instrumentation
Power - -
ATT RIBUTES      
Low-Temperature Rating -40°C -40°C -40°C
High-Temperature Rating 125°C 125°C 125°C
Cold Bend -
Impact Resistant -
Flame Resistant FT1
Oil Resistant
Chemical Resistant
Sunlight/UV Resistant
Cut/Abrasion Resistant(unarmored) -
STANDARDS,AGENCY AND ENVIRONMENTAL COMPLIANCE    
SAE
RoHS2
REACH

 

STANDARDS, AGENCY AND ENVIRONMENTAL COMPLIANCE:sae_logo.jpg

key:

  • - Not Applicable
  • √ Featured
  • ☆ Cost Competitive Custom Options Available
Features :
  • Signal
  • Control
  • Instrumentation
  • Power
DYNAMIC RANGE OF USE:
  • 20 AWG or 18 AWG, data pairs, power, video
    or control, and tinned copper stranding, drain
    wire, multiple shielding options available
  • Vehicle bus standard used for communication
    and diagnostics among vehicle components
  • Light and heavy duty, on and off-road trucks
    and trailers, construction and agricultural
    equipment and implements, marine and
    stationary applications like generator sets
BENEFITS:
  • Designed to exacting SAE J1939/11, SAE J1939/15
    and SAE J1128 specification
  • Compliant to RoHS2 and REACH standards
  • Competitively priced
  • Delivers consistent, reliable performance for your
    sophisticated, ruggedized data network
  • Features a jacket that makes pulling and stripping faster and easier
  • Withstands extreme conditions such as oil, fluids, equipment
    vibration and EMI/RFI interferencer
  • Exceptional impedance consistency over the entire cable
    length-which increases the efficiency and safety of your
    equipment and provides dependability you can count on
  • Type-Tough, waterproof TPR jacket offering high environmental performance
  • Type-Cut Resistant, special elastomer construction featuring unsurpassed
    cut and abrasion resistance plus outstanding oil resistance
nwi_direct.jpg nwi_express.jpg
 
 SAE J1939/11SAE J1939/15SAE J1128
INSULAT ED CONDUCTORS      
Conductor Count 2+ 2+ 2+
AWG(mm2) 20-18(0.5-0.8) 20-18(0.5-0.8) 24-8(.22-8)
Material XLPE XLPE XLPE
Minimum Wall Thickness
in inches (mm)
Dependent on construction Dependent on construction Dependent on gauge size
OVERALL CABLING      
Fillers -
Shielding -
Wraps -
OUTER JACKET      
Material -1
Color -
Overall OD inches (mm) Dependent on construction Dependent on construction Dependent on gauge size
ELECTRICAL      
Max. Operating Voltage 60
DC Resistance Max mΩ/ft (mΩ/m) 15.25(50) 15.25(50) Dependent on construction
DC Resistance Nominal mΩ/ft (mΩ/m) 7.625(25) 7.625(25) -
Impedance (Ω) 120 ± 10% 120 ± 10% -
Capacitance pF/ft (pF/m) 22.9(75)conductor to conductor
33.5(110)conductor to shield
22.9(75)conductor to conductor
33.5(110)conductor to shield<
-
Extreme Engineering :
extrme_75.jpg