| General Specifications |
|
| Conductor material |
tinned copper |
| Insulation Material |
PVC to AWM 1731 |
| Fillers |
fibrillated polypropylene where used |
| Inner conductor colors |
<color table 1> |
| Separator |
tissue paper |
| Shielded version: |
|
| Shield material |
60% min. TC braid, 100% Mylar foil |
| Shield type - shielded version |
braid over foil |
| drain wire AWG |
same as conductor size |
| drain wire stranding |
same as conductor |
| drain wire conductor material |
tinned copper |
| Outer Jacket |
|
| Material |
oil-resistant PVC |
| Color |
grey |
| Nom. wall thickness |
0.030" |
| Minimum wall thickness |
0.024" |
| Mechanical |
|
| Rated Flex Life |
1 million cycles torsion and bending |
| Operating temperature range |
-40..+105° C |
| Min. installed bending radius |
10 x nominal OD |
| Electrical |
|
| Max operating voltage - UL |
300V |
| Applicable Standards and Agency Compliance Standards |
|
| UL |
AWM 2517 |
| CSA |
AWM I/II A/B FT1 |
| Environmental and Use |
|
| Sunlight Resistant (yes/no) |
yes |
| Plenum/non-plenum |
non plenum |
| Available Put-ups |
|
| (state +/- lengths) |
contact factory |