| CABLE TYPE |
ODVA Device Net™ Thin Cable |
| Version |
ODVA "Thin" CL2, AWM |
| PART NUMBER |
FCL224C-007 |
| Network Standard |
ODVA DeviceNet |
Data Pair Specifications |
Physical Characteristics |
Specification |
| Conductor pair size |
24 AWG 19 strand TC |
| Insulation diameter |
0.079 ± .002" " |
| Colors |
Bu, Wh |
| Pair twist / ft. |
approx. 3 |
| Tape shield over pair |
Al/polyester foil out w/ shorting fold (pull-on applied) |
Electrical Characteristics |
Specification |
| Impedance |
120 Ù ± 10% |
| Propagation delay |
1.36 ns/ ft. (nom) |
| Capacitance between conductors |
11.33pF/ ft @ 1KHz |
| Capacitance between one conductor and other conductor connected to shield |
24pF/ ft @ 1KHz |
| Capacitive unbalance |
1200 pF/ 1000 ft.maximum |
| DCR - @ 20° C |
28.72 Ω/1000 ft. |
| Attenuation |
@ 125 kHz: 0.29 dB/100ft. max. |
@ 500 kHz: 0.50 dB/100ft. max. |
@ 1 MHz: 0.70 dB/100ft. max. |
DC Power Pair Specifications |
Physical Characteristics |
Specification |
| Conductor pair size |
22 AWG 19 strand TC |
| Insulation diameter |
0.056 ± .002" " |
| Colors |
Rd, Bk |
| Pair twist / ft. |
approx. 3 |
| Tape shield over pair |
Al / polyester foil out w/ shorting fold (pull-on applied) |
Electrical Characteristics |
Specification |
| DCR - @ 20° C |
18.1Ω /1000 ft |
General Specifications |
Physical Characteristics |
Specification |
| Geometry |
2 shielded pairs, common axis w/ drain wire in center |
| Overall braid shield |
65% minimum 36 AWG TC |
| Drain wire |
22 AWG 19 strand TC |
| Outside diameter |
0.290 ± .010" " |
| Roundness |
Radius delta less than 15% of 1/2 O.D. |
| Jacket marking |
Northwire Inc. DataCELL® FIELD DeviceNet Thin – FCL224C-007 (UL) 22AWG/2 24AWG/2 CL2 75°C E90625 or AWM 80°C 300V or CSA AWM I/II A/B 80°C 300V FT4 |
Electrical Characteristics |
Specification |
| DCR (braid+tape+drain) |
3.2 Ù/1000 ft nominal @ 20°C |
Applicable Environmental Characteristics |
Specification |
| Agency certifications (US and Canada) |
NEC (UL) type CL2 or AWM; CSA AWM |
| Flexure |
Tested 2000 cycles minimum at 4.5 bend radius 90 degrees 2 lb. minimum pull force, 30 cycles per minute, tic-toc method |
| Bend raduis |
20 x diameter (installation); 7 x diameter (fixed) |
| Operating ambient temperature |
-20..+75°C |
| Storage temperature |
-40..+85°C |
| Pull tension |
65 Lb Maximum |
| Connector compatibility |
Mini, Micro, Open |
| Topology compatibility |
Trunk, drop |
Field
